Ubercorn Power Cable (30 cm)
Use this sturdy 30cmĀ cable to daisy-chain power between Ubercorn panels in a larger row or grid layout.
This sturdy, AWG16, 30cm-long power cableĀ has spades that slipĀ under, and areĀ held in place by, the M3 screws on the power posts on the back of the Ubercorn panels. It lets you daisy-chain power between panels in a larger row or grid layout.
You'll also need one or more of our short or long Ubercorn data cables.
Note that each Ubercorn panel draws about 1A at 5V, so you canĀ just about get away with chaining two panels together fromĀ a single 2.5A Official Raspberry Pi Power Supply, but ideally you'll want a dedicated 5V power supply fed into one of the panels that can supply 1A to each panel in your setup.
Original: $2.34
-65%$2.34
$0.82More Images
Ubercorn Power Cable (30 cm)
Use this sturdy 30cmĀ cable to daisy-chain power between Ubercorn panels in a larger row or grid layout.
This sturdy, AWG16, 30cm-long power cableĀ has spades that slipĀ under, and areĀ held in place by, the M3 screws on the power posts on the back of the Ubercorn panels. It lets you daisy-chain power between panels in a larger row or grid layout.
You'll also need one or more of our short or long Ubercorn data cables.
Note that each Ubercorn panel draws about 1A at 5V, so you canĀ just about get away with chaining two panels together fromĀ a single 2.5A Official Raspberry Pi Power Supply, but ideally you'll want a dedicated 5V power supply fed into one of the panels that can supply 1A to each panel in your setup.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Use this sturdy 30cmĀ cable to daisy-chain power between Ubercorn panels in a larger row or grid layout.
This sturdy, AWG16, 30cm-long power cableĀ has spades that slipĀ under, and areĀ held in place by, the M3 screws on the power posts on the back of the Ubercorn panels. It lets you daisy-chain power between panels in a larger row or grid layout.
You'll also need one or more of our short or long Ubercorn data cables.
Note that each Ubercorn panel draws about 1A at 5V, so you canĀ just about get away with chaining two panels together fromĀ a single 2.5A Official Raspberry Pi Power Supply, but ideally you'll want a dedicated 5V power supply fed into one of the panels that can supply 1A to each panel in your setup.
